MEHYCOR light - Lightweight Aluminum Cylinders & Jacks. MEHYCOR light - Lightweight Aluminum Hand Pumps. The World's Largest Selection of Lightweight Aluminum Hydraulic Products.

Accessories for assembly of hydraulic systems MH, MC, MG, MM, MV Series

  • High-pressure hoses for secure connections cylinder with the hydraulic energy source (pump).
  • Made of nylon core with polyurethane outer jacket, which significantly increases the wear resistance (up to 7 times compared with rubber hoses) and provides a significant period of service at temperatures from - 40 °C to + 65 °C.
  • Are available in two versions: with coupling and protective cap (MC701B) and without coupling. Length 2 and 4 meters. Manufacture over 4 meters in length - on request.
  • Working pressures up to 110 MPa, burst pressure up to 330 MPa.



  • Quick couplings for fast and reliable connection (disconnection) of elements of hydraulic systems.
  • Are supplied as separately: half-coupling for hydraulic cylinder ("mother" - index "A") and half-coupling for hoses ("father" - index "B"), well as in assembly. In the complete set protective plastic caps.
  • Corrosion-resistant steel body and seals made ​​of nitrile extend the life of quick couplings and allow using them aggressive environments and temperatures from - 30 ° C to + 100 ° C.
  • Nominal diameter of 10 mm and high-precision ball mechanism of check valve allows the use of quick couplings with significant fluid flow.



  • Pressure gauges for visual monitoring of pressure in the hydraulic systems of up to 100 MPa.
  • Class of accuracy from 1 to 1.6.
  • All gauges are filled with a special liquid for more accurate readings in the case pressure spikes in the hydraulic system.
  • Stainless steel body of gauges protects it from the effects of corrosion.
  • Operating temperature range from - 30 ° C to + 80 ° C.
  • Also available complete with adapter for convenient mounting anywhere on of hydraulic system.



  • Manifolds for the assembly of hydraulic systems with connection possibility from 2 to 5 cylinders (jacks) on one source of pressure (hand pump or electric and gasoline pump).
  • Manifolds with 6 or more outputs - on request.
  • Unused ports are closed by special threaded plugs.



  • The flow distributor, the same as the manifolds (see above), but have the ability to control and management (cut-off) of each flow or connected cylinder - individually.
  • Are offered with outputs for 2, 3 and 4 of the consumer (cylinder). Distributors with 5 or more outputs - on request.
  • Unused ports are closed by special threaded plugs.



  • Manually Operated Check Valve for hold under load the hydraulic cylinder (jack) and to prevent lowering down the rod of cylinder, in case of disconnection or rupture of high-pressure hoses when performing of responsible works requiring long hold raised the load in needed position.
  • Corrosion-resistant steel of body and seals made ​​of nitrile, provide secure "lock" for the cylinder and also extend the life of the valve and allow its use in corrosive environments and temperatures from - 30 ° C to + 100 ° C.



  • Manually Operated Needle Valve to control the flow rate of fluid in different parts of the hydraulic system, and also for speed control of lifting (lowering down) rod of the cylinder (jack) while its operation. Can be used as shut-off valve for temporary load holding.
  • Corrosion-resistant steel body and seals made ​​of nitrile extend the life of the valve and allow their use in aggressive environments and temperatures from - 30 ° C to + 100 ° C.  

Hight-pressure hoses

Model
Working / BURSt pressure
nominal dia.
 Hose End Assemblies and Couplers
Lenght
Price
Order
Analogues
(MPa)(mm)(One End - Thread / Two End - Thread or Coupling)(mm)(USD)(pcs)ENERPAC
MH722С72/2806,33/8"-NPT / MC701B2  HC-7206
MH724С72/2806,33/8"-NPT / MC701B4   
MH72272/2806,33/8"-NPT / 3/8"-NPT2  H-7206
MH72472/2806,33/8"-NPT / 3/8"-NPT4   
MH1102110/3306,33/8"-NPT / 3/8"-NPT2   
MH1104110/3306,33/8"-NPT / 3/8"-NPT4   

Quick couplings

ModelWorking pressureConnecting thread (outer)Connecting thread (internal)PriceOrder Analogues
(MPa)(inch)(inch))(USD)(pcs)ENERPAC
MC701A703/8"-NPT   CR-400
MC701B70 3/8"-NPT  CH-604
MC701703/8"-NPT3/8"-NPT  C-604

Pressure gauges

ModelMeasuring rangeGauge DiameterConnecting thread of Gauge Connecting thread of AdapterPriceOrder Analogues
(MPa)(mm)(inch)(inch)(USD)(pcs)ENERPAC
MG63800-8063G1/4"   GP-10S
MG1001000-100100G1/2"   GP-15S
MGA63800-8063 3/8"-NPT  GPA-10S
MGA1001000-100100 3/8"-NPT  GPA-15S

Manifolds

ModelNumber of ports (outputs)Connecting thread of portsPriceOrderAnalogues
(pcs)(inch)(USD)(pcs)ENERPAC
MM0223/8"-NPT   
MM0333/8"-NPT  A-64
MM0443/8"-NPT  A-65
MM05C53/8"-NPT  A-66

Split-Flow Manifolds

ModelNumber of ports (outputs)Connecting thread of portsPriceOrder Analogues
(pcs)(inch)(USD)(pcs)ENERPAC
MM1223/8"-NPT  AM-21
MM1333/8"-NPT   
MM1443/8"-NPT  

AM-41

Manually Operated Check Valve

ModelWorking pressureConnecting threadPriceOrderAnalogues
(MPa)(inch)(USD)(pcs)ENERPAC
MV701703/8"-NPT  V-66

Manually Operated Needle Valve

ModelWorking pressureConnecting threadPriceOrder Analogues
(MPa)(inch)(USD)(pcs)ENERPAC
MV702703/8"-NPT  V-82

 

All rights reserved
MEHYCOR 2012